How to Clean and Descale Your EspressoWorks Coffee Maker

A Clean Machine for a Clean Coffee Taste

You've invested in a fantastic coffee maker, and you're enjoying rich, delicious coffee every day. But suddenly, your coffee's taste becomes lacklustre. What's the problem? Your machine needs a good cleaning and descaling to maintain its performance and enhance your coffee experience.

To get your coffee maker back to its prime, we suggest the following cleaning essentials:

• Espresso machine cleaning powder
• Milk system cleaning tablets
• Grinder cleaner
• Cleaning brush for portafilter, coffee head, and any other small area of the machine. 
• High-quality descaling liquid (make sure it's vinegar-free)

Cleaning Your Espresso and Cappuccino Maker (AEW-3001)

Unplug the machine and follow these steps to clean your espresso maker regularly:

https://drive.google.com/file/d/1SDzFVJwpIJ78Oq-wwGDgjRTnY1ex5VB0/view?usp=sharing

1. Remove the milk reservoir from the machine and take off the cover by pressing the release button
2. Take off the rubber straw. (Note: A little force may be needed to remove it the first time.)
3. Insert a toothpick into the hole on the milk reservoir as shown, and move the needle in and up and down motion. 
4.  Insert a pipe cleaner into the straw and move in an up and down motion several times.
5. Remove the metal spout from the top of the milk tank. (Note a little twist/wiggle motion and force may be needed)
6. Insert a pipe cleaner into the metal spout itself and where it attaches to the machine and clean well.
7. Remove the filter basket from the portafilter.
8. Clean the portafilter exit holes and the filter baskets with a soft brush, such as a toothbrush.
9. It is important to ensure that your brew head area is clean and free of any loose grinds that may get caught in that area during an extraction.
10. After the machine cools down, remove the portafilter and use a damp cloth to clean out the area thoroughly.

Descaling Your Espresso and Cappuccino Maker (AEW-3001)

When you notice an excess of steam and longer brewing time, it's time to descale your machine. Use a non-vinegar descaling liquid and follow these steps:

1. Fill the water tank with descaling liquid and water as per instructions.
2. Fill the milk reservoir with water.
3. Remove the milk nozzle.
4. Press and hold the "Clean" button for 4-5 seconds until blue lights start flashing.
5. Wait for the cleaning process to complete (around 15 minutes).
6. Press the "Clean" button again for 1 second after the first cleaning cycle.
7. A second cleaning cycle will run (5 minutes).
8. The yellow control lamp indicator will turn off once done.
9. Process may need to be repeated 2 or 3 times. (Depending on the frequency of cleaning)

Cleaning Your All-In-One Espresso Machine Set (AEW-1001)

Unplug the machine and follow these steps to clean your espresso maker regularly:

1. Disassemble the machine and clean the brew head, milk reservoir, and filters after each use.
2. Backflush and clean all tubes and lines..
3. Thoroughly dry the machine before reassembling.
4. Use the grinder cleaner and milk cleaner to maintain a clean machine and accessories.
5. Check the mains for any damage.

Descaling Your All-In-One Espresso Machine Set (AEW-1001)

If you notice an excess of steam and longer brewing time, it's time to descale your machine. Use a non-vinegar descaling liquid and follow these steps:

1. Fill the tank with water and a household descaling agent of your choice to the MAX level.
2. Place the milk frothing cup under the built-in steamer and turn the dial on the machine to the central dot. Press the " ON/OFF" button once and wait while the machine starts heating up and the POWER indicator will illuminate with a red light. 
3. Once your machine has completed the heating phase, the READY indicator will illuminate with a green light. Make two cups of coffee (roughly 2oz) by turning the dial on the machine to "ESPRESSO". Next, turn the dial to the central dot, and wait five seconds. 
4. When the READY indicator flashes green, turn the dial to "STEAM" and wait for two minutes before turning the dial back to the central dot to stop the steaming process. Press and hold the "ON/OFF" button for about three seconds and your machine will turn itself off and all indicators will not have any light indications. Allow for the descaling agent to work for at least 15 minutes.
5. Restart your espresso machine and repeat steps 2 to 4 at least three times.
6. With the dial set to the central dot, turn the knob to "ESPRESSO" while the "READY" indicator is green. This allows your machine to flush out any remaining descaling agent.
7. Ensure that the tank is filled with water to the MAX level, before setting the dial to "ESPRESSO". Repeat steps 2 to 4 at least three times until there is no water left in the tank.
8. Repeat step 7 three times to ensure that your espresso machine is in full working condition.

Savour the Perfect Cup of Coffee with a Sparkling Clean All-In-One Espresso Machine Set (AEW-1000)

For coffee aficionados, a clean and well-maintained espresso machine is the key to unlocking a world of rich, smooth and delicious coffee flavours. To ensure that your All-In-One Espresso Machine Set (AEW-1000) delivers barista-level quality every time, you'll want to keep it in pristine condition. Here's a simple and easy guide on how to clean and descale your machine, so you can enjoy a perfect cup every time.

A Deep Clean for Your Espresso Machine

Unplug your machine, and let's begin with the deep clean. Disassemble the machine and reach all those hard-to-get areas with a brush for a thorough clean. Clean the brew head, milk reservoir, and filters after each use, and don't forget to backflush and clean all tubes and lines with espresso machine cleaning powder. Make sure everything is thoroughly dried before reassembling the machine. Keep your grinder and milk cleaner handy, too, so you can keep those accessories sparkling and hygienic. Check the mains for any damage, and you're all set!

The Art of Descaling

If you've noticed that your machine is producing excess steam or the brewing process is slower than usual, it may be time for a descale. Here's what you need to do: Fill the water tank with the right mix of descaling liquid and water, place the milk frothing cup under the built-in steamer, and press the "ON/OFF" button. Wait for the machine to power up and the heating process to begin. Once the POWER indicator turns green, run the machine as if you're making two cups of espresso, and follow the steps as described above. Repeat the descaling process at least three times, making sure to flush out any remaining descaling liquid when done. Fill the tank with just water and repeat the steps three times to ensure the machine is thoroughly cleaned.

Maintenance is Key!

By following these simple steps regularly, you'll keep your All-In-One Espresso Machine Set in top condition. Remember, maintenance is key to unlocking the full potential of your coffee machine, so you can enjoy barista-level quality every time. So, plug in your machine, brew a cup, and savour the delicious flavours of a clean and well-maintained espresso machine.

Happy Brewing!